7 Steps to Master Wearing A Tool Belt Like A Pro


Wearing a tool belt

Step-by-Step Guidebook on Wearing a Tool Belt

Congratulations on buying your tool belt set. It is now time to understand the process of wearing a tool belt.

Remember, if you fail to put on the tool belt appropriately; it will give you discomfort and pain in your waist and hips. It can even harm your work efficiency.

If you are carrying a lot of tools, it is imperative to get suspenders. Hence, now you also need to understand the process of attaching suspenders with tool belts. 

And if you think that putting on the tool belt is easy, then you are in for a shock.

Not all the techniques of how to wearing a tool belt are natural and effective. But, you do not have to worry.

As in the forthcoming sections of this write-up, we have provided specific steps to help you get the most of your tool belt and suspenders.

I promise after reading this piece of content, you will be in an excellent position to effectively use the recently purchased tool belt and suspenders. 

With the help of the steps, we will educate you and grow your skills remarkably. 

So, without much ado, let’s get started.

The steps that we have mentioned below will help you effortlessly put on the tool belts and suspenders. But, before that, it’s essential to understand the advantages of tool belts first.

Benefits of Wearing a Tool Belt

Wearing a Tool Belt

This post may have affiliate links, which means I may receive commissions if you choose to purchase through links I provide (at no extra cost to you). As an Amazon Associate I earn from qualifying purchases. Please read my disclaimer for additional details.

Tool belts are quite ingenious components of tool carriers. They make it easier to organize the tools and save your precious time.

The very first benefit of wearing tool belts is that you can easily organize a lot of tools at a single place.

They can be arranged neatly by different sizes at their different pockets and slots.

This way, you can easily access the tools, whenever required. The tool belts can even be considered as a “Secondary hand”.

Tool belts can hold a lot of tools, you can effortlessly carry a wide range of tools like a chiselscrewdrivers, tape chain, nails, markershammer, etc.

In case, you keep a sharp tool in your pant or shirt pocket; it can poke you.

However, the tool belt can hold these kinds of tools without any prodding.

By wearing a tool belt, you also save lots of precious time.

In case of altitude and need to nonstop climb up and down to retrieve tools; it can waste a lot of time.

Tool belts can curb this problem and help you work efficiently.

Let’s now look at the various steps on how to wearing a tool belt.

It includes a tool belt’s orientation, tool organizing, and belt wearing.

A Step-by-Step Guidebook on Wearing a Tool Belt and Suspenders

A Step-by-Step Guidebook on Wearing a Tool Belt and Suspenders

Step #1: Purchase a Tool Belt That Consists of the Requisite Features to Make the Most Out of It

It is essential to select a tool belt that consists of the best features.

These include comfy back support, lots of tools storing capacity, lightweight, and much more.

You will also need lots of pockets, tool holders, and slots to store different tools.

You also require hand tools, fastener tools, power tools, and sometimes exclusive tools for completing a particular task.

The tool belt you select needs to have all these facilities to perform your job effectively.

Also, look out for the excellent leather belt, since it is the most durable option.

You also need to look at the fastening handles, suspender rings, adjustability, and other critical aspects.

Video: STOP DOING THIS! How To Wear A Tool Belt The RIGHT WAY!
Video Credit: VCG Construction – Click Here to watch directly on YouTube

Step #2: Scrutinize the Tool Belt Before Each Use

Scrutinize the Tool Belt Before Each Use

Inspect the tool belt before using it.

Remember, it can get dirty after using it for several days.

Since dirty belts do not provide comfort while wearing, you need to clean them before wearing them.

There are times when they might get damaged too. In such cases, you need to repair them.

For safety reasons, inspect the buckets whether they work or not.

Also, keep a close eye at the pouches.

In case, there are any holes present, don’t wear them before repairing the faults.

Step #3: Organize the Tool Belt and Pouches

Select a belt that suits you the best.

Irrespective of whether you are a right-handed or left-handed person, it is essential for your belt to perform following your styles.

In case you are a right-handed person, the buckle needs to be on the left side, and the main pouch should be on the right side.

In case you are a left-handed person, the orientation will be just the opposite of what we mentioned in the earlier statement. 

There are a few models that will enable you to shift the tool pouches.

In case you belong to this type, you need to reposition the tool pouches under your assistance.

If you are using a three pouches tool belt, it is imperative to set up the middle bag in a reasonable manner so that it couldn’t disturb you.

Step #4: Keep the Main Tools in First Hand and Auxiliary Tools in Opposite Side

Every tool will not be vital for you.

The best thing is to prioritize and organize as per your requirements.

The tools that you need regularly need to be kept on your primary side and the less important ones on the second hand.

It will help you to access the necessary tools without much effort.

Some of the primary tools for the tool belt would include the carpenter’s pencil & pen, chalk line, utility knife, lineman pliers, etc.

While the secondary tools include a 4-in-1 screwdriver, nail sets, cold chisel, speed square, electrical tape, torpedo level, etc. 

Since there might be variation in work, hence, the primary and secondary tools might differ.

Step #5: Never Carry Additional Tools

Extra tools can result in back pain.

Hence, opt for tools wisely.

Ensure that you do not carry weights more than recommended by the manufacturer.

Step #6: Keep Your Hands Free While Climbing or Working at Heights

jack finnigan jX1GvCRwZXQ

In case you are climbing using a ladder or working at heights, it becomes essential to hold the ladder or get reliable support.

In that case, you need to free up your hands.

Remember, if you have tools in hand, you will not be able to grab the ladder properly and might fall and get injured. 

While climbing, do not carry all the tools at once, but only the essential ones.

Have a wristband to carry small tools while climbing ladders.

Step #7: When Tool Belt Suspenders Become Necessary?

In case you are a professional contractor, it is imperative to carry tools in your tool belt, which makes the belt heavy naturally.

It may lead to stains on your backbone and nearby waist area.

If you continuously do that, it can hurt your body.

The solution to this problem is installing suspenders with the tool belt.

The good thing about suspenders is they distribute the weight evenly throughout the body so that additional weight does not impact the waist zone.

If you do not put in the suspenders, the weight of tool pouches may rib in your hips and lead to discomfort.

Hence, we suggest you get a good-quality suspender and get excellent performance from them.

Master Wearing A Tool Belt with Suspenders Like A Pro

Video: How To Wear a Tool Belt like a PRO
Video Credit: Wranglerstar – Click Here to watch directly on YouTube

It is straightforward to put on a tool belt suspender.

The steps for how to wearing a tool belt include:

  1. Put on the tool belt and fasten it appropriately before integrating suspenders with it.
  2. Attach the tool belts with suspenders to the back of your pants or trousers.
  3. Put the suspender tool belt through the end and the chest. You also need to locate the braces, crossing the end and approaching back to the chest.
  4. The next step is to fasten the harness strap with the front of the trousers.
  5. In case there is an additional chest strap, lock it too. It will get rid of the unwanted movements of the suspenders. It is especially critical for roofing with tool belts related tasks.
  6. Once the attachment process is over, scrutinize the fitting of the suspenders. In case, it does not fit appropriately, adjust the straps until it fits perfectly.
  7. The final step is to improve the pockets and get painless shoulder support suspenders.

Our Recommended for Tool Belt

Final Words on How To Wearing a Tool Belt

Tool belts and suspenders are vital gadgets for professional contractors.

Although it is not a tough job to wear tool belts and suspenders, it requires some skills.

The things that we have mentioned in this write-up will help you to wear a tool belt and suspenders within a quick period.

However, keep this in mind, you need to practice a lot and enhance your skills before you can do it successfully.

Recent Content